easyWider multi-surface primer pen 25ml


This Includes:

1x pump action pen containing 25ml of adhesion promotor / Multi-surface primer.

Categories: ,


This is the exact same primer we use during the manufacture of easyWider wheel arch extensions to achieve maximum adhesion of the UHB tape to the PVC extension, which is traditionally a difficult substrate to bond to by Chemically altering the substrate surface to increase surface energy making it more receptive to adhesive bonding and resulting in much higher bond strength and temperature resistance.

This product has been tried and tested by ourselves for many years now and we are happy to be able to offer this in a handy easy to use applicator featuring a generous 25ml contents and massive 10mm wide nib for use on all bonding activities involving pressure sensitive tapes, vinyl adhesives, vehicle wraps and much much more.

The use of the primer would also be advisable if fitting easyWider wheel arch extensions to a difficult substrate such as rough textured plastic bumpers meaning easyWider can be fitted to anything.

Our Multi Surface Primer has been specifically designed for single process cleaning to promote adhesion of high strength HS bonding tapes. It dramatically enhances bond strength of high strength bonding tapes although it is compatible with most technologically advanced acrylic adhesives. Applications Surfaces such as; plastics metal and painted metal surfaces…

Surfaces such as;

  • plastics
  • metal and painted metal surfaces
  • powder coats
  • galvanised and chrome plated steel
  • concrete
  • wood
  • glass
  • Automotive:
  • Vinyl wrap promoter
  • solar & window films
  • Auto foil
  • 3D Carbon fibre film
  • Car Trim
  • EPDM seal strip.

Features & benefits

  • Requires no specialist equipment
  • Fast Acting
  • Easy to use

How to apply easyWider Multi Surface Primer.

Care should be taken when opening these containers.

Remove any heavy contaminants such as dirt and excessive greases or oils with IPA Surface Cleaner following the instructions.

Shake well before use

Apply a thin uniform coating of Surface Primer using a clean, dry, lint-free cloth.

Product should flash-off in around 10 seconds but dry any over-wet areas and we recommend leaving the surfaces for 5 minutes prior to bonding to allow the primer to act on the surface.

Porous surfaces may require a second application to ensure uniform coverage and good adhesion.

Allow first application of primer to dry before applying the second coat.

Occasional skin contact with Multi Surface Primer should have no adverse effect.

Prolonged soaking or repeated contact is not recommended.


Product Specification


PropertySpecificationSolids:Approximately 5%-8%Flashpoint:39ºF (4ºC)Viscosity:40 +/-5cpsAvailable in:25ml pens


There are no reviews yet.

Be the first to review “easyWider multi-surface primer pen 25ml”

Your email address will not be published. Required fields are marked *

You may also like…

Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.